![]() ![]() Put back the battery and plug the charger into the laptop.Now, to power reset press and hold the power button for 30 seconds > let go of the buttons after 30 sec.Next, get the battery out of the Lenovo laptop.Detach the power cable from the socket and laptop.When the power cable is plugged in but not charging the Lenovo laptop, try power resetting. If damaged replace it.Īfter that, check the AC adapter, which may cause battery charging issues. For this, firstly, check the power cable. Fix 3: Check for Hardware issueĪfter following the above two steps, if the laptop battery is plugged in and still not charging, run a check for faulty hardware. If it doesn’t work, you’ll need to replace the battery. Clean the battery compartment, replace the battery and double-check that all contacts are in place. ![]() If it works without the battery, your laptop’s battery is the problem. Unplug the charger and any other connected devices.Īfter removing the battery, press and hold the power button for a few seconds to discharge any leftover charge in the system, connect the charger and attempt to turn your laptop on. If your laptop has a detachable battery, remove it completely. Read Also: How to Update Lenovo Thinkpad Driver Fix 2: Remove the Battery and Connect it to the Power Also, check the joint where the cable connects to the AC adapter. After that, double-check its connection to the electrical outlet. Remove the Battery and Connect it to the Powerįix 1: Check All Physical Cable Connectionsīefore troubleshooting to fix the charging issue, let’s do some basic checks.įirstly, check if the charging wire is securely placed into the charging port on your laptop or not.Just walk through each fix until you find the right one. Here we list the workable solutions to try. The camera should now be working with the generic device driver.How to fix the Lenovo Plugged in Not Charging Issue?.Make sure ‘USB Video Device ‘ is selected and click ‘Next’.Click on ‘Let me pick from a list of device drivers on my computer’.Choose ‘Browse my computer for driver software’.From the list, expand ‘Imaging Devices’ and click on ‘Update Driver Software’.Click on the Windows button at the bottom left of the screen and type ‘ Device Manager’.Replace device driver with generic Microsoft driver Restart and the camera should be working again.Search for “lenovo settings” select it from the list and click uninstall.type ‘programs and features’ when you see it appear in the list – click on it.To uninstall the software click on the Windows button on your keyboard,.Having said this, on my Lenovo laptop I do not use this software (for both Windows 8/8.1 and Windows 10) with no issues at all. This is moderate risk – you may find that some hardware stops working correctly or that you need to use the software to manage settings, but cannot due to it being uninstalled. Uninstalling the Lenovo Settings Dependency Package software download and install the Lenovo Settings Dependency Package software.Īfter this has been done repeat solution 3 above.If these instructions didn’t help you, you could try … Updating the Lenovo Settings Dependency Package software. At the top of the page, click on ‘Display & Camera’.Click on the menu icon at the top right and then click on ‘My Device Settings’.Open the Windows start menu, and type ‘Lenovo Vantage’ and open it (if you do not have Lenovo Vantage installed you can find it on the Windows App Store).Solution 3: Enable using Lenovo Vantage app If it doesn’t – try holding the ‘Fn’ key and the camera key.Press the key to see if it enables the camera.Look on the laptop keyboard for a camera icon – this is usually around F8. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |